| TOA D5000 Digital Wireless
| WM-D5200 Digital Wireless Microphone
WM-D5200
The WM-D5200 Digital wireless microphone employs an electret condenser microphone capsule and is suitable for any applications. This wireless microphone employs a digital transmission system that is effectively immune to interference. Further, not only does TOA’s unique information concealment technology (Encryption Setting function) ensure high confidentiality and security against eavesdropping, but their code setting and transmission output selection functions ensure that this microphone is also compatible with a wide range of operating conditions, such as use of the same transmission channel between adjacent areas.
|
Microphone Element |
Electret condenser unit: Unidirectional |
|
Modulation type |
FSK |
|
Frequency Range |
C4/C7 ver.: 798 - 832 MHz, G1 ver.: 606 - 636 MHz, H1 ver.: 576 - 606 MHz, A2 ver.: 694 - 703 MHz |
|
Channel Selectable |
160 channels (The number of channels may differ from country to country.) |
|
RF Carrier Power |
Less than 50 mW |
|
Maximum Input Level |
132 dB SPL (Sensitivity: L)/122 dB SPL (Sensitivity: H) |
|
Audio Frequency Response |
100 Hz - 12 kHz |
|
Antenna |
Built-in type |
|
Dynamic Range |
Typ. 90 dB (when used with WT-D5800) |
|
ID Selectable |
10 patterns |
|
Battery |
WB-2000 rechargeable battery (option) or AA Alkaline dry cell battery |
|
Battery Life |
Approx. 8 hours |
|
Operating Temperature |
-10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) (except battery) |
|
Operating Humidity |
30 % to 85 %RH (no condensation) |
|
Finish |
Body: ABS resin, black, coating |
|
Dimensions |
ø47 × 239.5 mm (ø1.85 × 9.43 in) |
|
Weight |
220 g (0.49 lb) (with battery) |
|
Accessory |
Storage case …1, Screw driver (for setting) …1, Microphone holder W3/8" (stand adapter W5/8" -> W3/8")…1 |
|
Option |
Battery charger: BC-2000 (*1) |
| WM-D5300 Digital Wireless Transmitter
WM-D5300
The WM-D5300 Digital wireless transmitter has been manufactured for use with a UHF system. It is for use in speech reinforcement applications. This wireless transmitter employs a digital transmission system that is effectively immune to interference. Further, not only does TOA’s unique information concealment technology (Encryption Setting function) ensure high confidentiality and security against eavesdropping, but their code setting and transmission output selection functions ensure that this transmitter is also compatible with a wide range of operating conditions, such as use of the same transmission channel between adjacent areas.
|
Frequency Range |
C4/C7 ver.: 798 - 832 MHz, G1 ver.: 606 - 636 MHz, H1 ver.: 576 - 606 MHz, A2 ver.: 694 - 703 MHz |
|
Modulation type |
FSK |
|
Channel Selectable |
160 channels (The number of channels may differ from country to country.) |
|
RF Carrier Power |
Less than 50 mW |
|
Maximum Input Level |
-18 dB (*1) (Sensitivity: L)/-28 dB (*1) (Sensitivity: H) |
|
Audio Frequency Response |
100 Hz - 12 kHz |
|
Antenna |
Lamda/4 whip antenna |
|
ID Selectable |
10 patterns |
|
Battery |
WB-2000 rechargeable battery (option) or AA Alkaline dry cell battery |
|
Battery Life |
Approx. 8 hours |
|
Operating Temperature |
-10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) (except battery) |
|
Operating Humidity |
30 % to 85 %RH (no condensation) |
|
Finish |
Body: ABS resin, black, paint |
|
Dimensions |
C4/C7 ver.: 62 (W) x 171 (H) x 19 (D) mm (2.44 in x 6.73 in x 0.75 in) |
|
Weight |
90 g (0.2 lb) (with battery) |
|
Accessory |
Storage case …1, Screw driver (for setting) …1 |
|
Option |
Battery charger: BC-2000 (*2) |
| WT-D5800 Digital Wireless Receiver
WT-D5800
The WT-D5800 is a PLL-synthesizer controlled double super-heterodyne diversity receiver designed to be used with a UHF wireless system. Employing a digital reception system that is virtually immune to interference and noise, the WT-D5800 Wireless Receiver ensures stable radio signal reception. Additionally, this receiver features a host of convenient functions, such as external equipment control by way of contact outputs, and system status monitoring by way of its maintenance software, enabling highly reliable operation..
|
Power Source |
AC mains (supplied AC adapter must be used) |
|
Current Consumption |
350 mA (13.5 V) |
|
Frequency Range |
EC4/EC7 ver.: 798 - 832 MHz, EG1/GG1/-G1 ver.: 606 - 636 MHz, RH1 ver.: 576 - 606 MHz, A2 ver.: 694 - 703 MHz |
|
Channel Selectable |
160 selectable frequencies |
|
Receiving System |
Double super-heterodyne |
|
Diversity system |
Space diversity (digital diversity) |
|
Mixing Output |
MIC/LINE (selectable): -60 dB (*1) (MIC)/-20 dB (*1) (LINE), 600 Ω phone jack (unbalanced), 600 Ω XLR-3-32 type connector (balanced) |
|
Mixing Input |
-20 dB (*1), 10 kΩ, unbalanced, phone jack |
|
Antenna Input |
75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max) |
|
Antenna Output |
75 Ω, BNC (Gain 0 dB) |
|
Contact Output |
1 channel, no-voltage make contact output, withstand voltage: 30 V DC, control current 0.5 A max, terminal block (2pins) |
|
Receiving Sensitivity |
24 dBμV or less (Bit error rate:1E-5 or less) |
|
Antenna Input Attenuator |
0 dB/-10 dB switchable |
|
Indicator |
Audio (5 steps), RF (5 steps), ANT A/B, Audio (peak), Battery alarm |
|
Frequency Response |
50 Hz - 12 kHz |
|
Total Harmonic Distortion |
0.5 % or less |
|
Function |
Frequencies scanning, Feedback suppressor, Equalizer (optimizing each compatible microphone) |
|
ID Selectable |
10 patterns |
|
Operating Temperature |
-10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) |
|
Operating Humidity |
30 % to 85 %RH (no condensation) |
|
Finish |
Resin, black |
|
Dimensions |
210 (W) x 44 (H) x 211.9 (D) mm (8.27 in x 1.73 in x 8.34 in) |
|
Weight |
730 g (1.61 lb) |
|
Accessory |
AC adapter (*2) …1, Whip antenna …2, Rubber foot …4 |
|
Option |
Rack mounting bracket kit: MB-WT3 (for rack mounting one WT-D5800 unit), MB-WT4 (for rack mounting two WT-D5800 units) |
| BC-2000 Battery Charger
BC-2000 Y
The BC-2000 is a dedicated battery charger for the WM-D5200 Digital wireless microphone and WM-D5300 Digital wireless transmitter. It works with the optional AD-5000-2 AC adapter. The BC-2000 employs a quick charging system for nickel-metal hydride (Ni-MH) batteries, allowing up to 2 units to be fully charged within 3 hours.
|
Power Source |
12 V DC (Optional AC Adapter AD-5000-2 must be used) |
|
Current Consumption |
700 mA |
|
Charging Time |
Max. 3 hours |
|
Number of Units to be Charged Simultaneously |
2 pieces |
|
Operating Temperature |
0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) |
|
Operating Humidity |
30 % to 85 %RH (no condensation) |
|
Finish |
Case: ABS resin, black, semi-gloss, paint |
|
Dimensions |
238 (W) × 108.5 (H) × 98 (D) mm (9.37" × 4.27" × 3.86") |
|
Weight |
550 g (1.21 lb) |
|
Option |
Ni-MH battery: WB-2000-2 (containing 2 pieces) |
TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless TOA D5000 Digital Wireless
Related Products
+880 1995 584 322, 880 1717 157 398, +880 1911 385 563
